Post by THEYELLOWONE on Jul 21, 2013 10:03:53 GMT -6
I installed this back in January, but seeing as we have a few more JKs in the ranks (who actually have these excessive emissions devices) I thought I'd post the pictures. This is the kit from Woods (Jeepswag.com $59). It relocates the exhaust evaporative doohickey from under the middle of the jeep (where it is prone to being smashed) to above the rear axle. Skid plates are another option, but they leave the connections on the rear of the canister vulnerable and cost at least $100.
Old location
Bracket to hold it in place uses existing hole in rear crossmember and requires drilling one hole into cargo area.
And then it's done, tucked high out of the way.
It comes with 3 hoses to extend the factory ones to reach the new location. The longest one is about 12". Comes with clamps and zip ties. I'll post a few more pics in case that helps. Have not thrown any codes or had any problems, definitely recommend this kit. I actually ordered it from rebeloffroad.com for under $50
Cut this line off the canister
Factory connection that gets rotated
One of the supplied hoses
Assemble these then mount to the canister
Finished product
It took me about 2 hours, but I read the directions about 10 times and need LOTS of pictures.
Old location
Bracket to hold it in place uses existing hole in rear crossmember and requires drilling one hole into cargo area.
And then it's done, tucked high out of the way.
It comes with 3 hoses to extend the factory ones to reach the new location. The longest one is about 12". Comes with clamps and zip ties. I'll post a few more pics in case that helps. Have not thrown any codes or had any problems, definitely recommend this kit. I actually ordered it from rebeloffroad.com for under $50
Cut this line off the canister
Factory connection that gets rotated
One of the supplied hoses
Assemble these then mount to the canister
Finished product
It took me about 2 hours, but I read the directions about 10 times and need LOTS of pictures.
